PR 6207 Bending Beam LC

PR 6207 Bending Beam Load Cell

The load cell PR 6207 is specially designed for tank and hopper weighing and for the use in platform scales or belt weighers. The design principle of the mounting kit PR6007 will counterbalance movements arising from mechanical and thermal expansion or contraction of its supporting structure. A particular design characteristic is that the sensor is manufactured out of stainless steel (1.4122) and the membrane is made out of 1.4541. Therefore the line is distinguished with high measurement accuracy and high repeatability as well as stability and reliability. This is the sound basis for maintenance free work and years without any further adjustments. The hermetically sealed sensor allows to use the device even under extreme operation conditions. The entire measurement chain can be calibrated without using a reference weight. Due to "matched output" technology, a damaged load cell can be exchanged without the need of re-calibration. This saves a tremendous amount of time during commissioning and in case of necessary replacement.





  • Easy to install and use

  • Full stainless steel construction

  • Wide temperature range

  • Resistant against vibrations

  • Hermetically sealed, IP 67

  • Compatible with other sources


Load Cell Construction:

  • Double bending beam, all stainless steel, hermetically sealed, welded, filled with inert gas.



  • Load cell: 1.4542 (DIN 17440) Similar to S604, S622 (B.S.), 17-4 PH



  • IP 68, IEC 529 (equivalent to NEMA 6). The load cell can be submerged in water to a depth of 1.5m for 10,000 hours. Robust, flexible, screened; Sheath: TPE Thermopl. Elastomere, Colour: grey (EX: blue); Diameter: 5 mm, wires 4 x 0.35 mm2; Length: 5 m


Bending Radius:

  • Fixed installation: ≥ 50mm; Flexible installation: ≥ 150mm


Certificate of Conformity:

  • Valid for: PR 6246/..E; Feature: II 1G EEx ia IIC T6, II 1D IP65 85°C; Registration number: PTB 02 ATEX 2059, TÜV 03 ATEX 2301x